Register

Welcome to the Marijuana Growing forum

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

User Tag List

Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24
  1. #21
    Marijuana Growing Member
    Join Date
    May 2017
    Posts
    82
    Thumbs Up
    Received: 72
    Given: 29
    Mentioned
    14 Post(s)
    Tagged
    0 Thread(s)

    0 Not allowed!
    I decided to remove some of the oil from the cartridge by adding a tiny bit more of the Extract. I was then able to draw some the mix out with the syringe. That seemed to help quite a bit. I was able to get very smooth puffs with out sucking hard. I also had better luck with the fit between the cartridge and the battery. Might be this one cart is a bit off.

    I've also learned there are, in fact, special cartridges made for using the thicker oils like what pressing will produce. One that keeps coming up as highly recommended is the Liberty V9. Sells for around $6 on EBay. Less in quantity. I have one on order from China to try out.

    In the mean time, I'm doing fine, but if this V9 will work with less dilution, all the better.
    Last edited by Maryjane; 01-09-2018 at 10:16 PM.

  2. #22
    Marijuana Growing Member
    Join Date
    May 2017
    Posts
    82
    Thumbs Up
    Received: 72
    Given: 29
    Mentioned
    14 Post(s)
    Tagged
    0 Thread(s)

    0 Not allowed!
    I am finding the more I use up what is in my first test cartridge the more potent the result. It seems to work best, with the thick oil, when very little is covering the wick.

    My concern now are the fats and lipids in the oil. Cannabis itself has lipids and they should not be inhaled with any frequency. Very bad for the lungs. High-end extraction techniques, that use some form of winterization, remove these compounds. Simple pressing does not.

    The firm that I purchased my extract from offers their "clear" version. A modified version that will, they claim, remove the fats and lipids through heat, separation over time and a final filtering. I have some on order and will use this for my next cartridge.

  3. #23
    Marijuana Growing Member
    Join Date
    Apr 2017
    Location
    Navadafornia
    Posts
    281
    Thumbs Up
    Received: 170
    Given: 634
    Mentioned
    10 Post(s)
    Tagged
    0 Thread(s)

    0 Not allowed!
    There are~ or better yet~ Are there vaping devices that can be used with solid material```

  4. #24
    Marijuana Growing Member
    Join Date
    May 2017
    Posts
    82
    Thumbs Up
    Received: 72
    Given: 29
    Mentioned
    14 Post(s)
    Tagged
    0 Thread(s)

    0 Not allowed!
    Quote Originally Posted by sethrak View Post
    There are~ or better yet~ Are there vaping devices that can be used with solid material```
    If you mean devices that use the flower, directly, yes. These heat the flower in a small "oven" at up to 400 degrees. I bought one called Wulfvape-SX for around $80. It works but is a pain to use. Holds only a small amount of material and it will get clogged very quickly making inhaling a chore. There are many others that work basically the same.

    I find using the vape pen with oil to be the best of all possibilities, for me at least. Really a "no muss, no fuss" alternative. I plan to keep going in this direction and refining the process as I go.

Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top